Hdfury Integrall + 2x 4k hdmi extender + 6x HDMI Cable 28AWG

€229.99
In stock
SKU
Hdfury Integrall + 2x 4k hdmi extender + 6x HDMI Cable 28AWG

HDfury Integral is capable of connecting any HDCP revision sources devices to any HDCP revision sink devices. GUARANTEED!
If you ever saw the following statement: “this TV does not support HDCP 2.2. Make sure you have HDCP 2.2 capable TV” or a similar HDCP error message, make sure you never see it again with HDfury Integral! Featuring 2 inputs and 2 outputs, HDfury Integral can act as a Splitter, Infoframe and HDR metadata Injector and Extractor, HDCP Doctor, CEC Commander, Audio extractor, Audio replacement, HDMI Doctor, Matrix, EDID management and more… Discover the tomorrow’s hardware today!

HDMI Extender 4KX2K HDbitT HDMI over IP CAT6 Extender

This HDMI extender applies HDbitT technology, to transmit HDMI signal over single CAT5/5e/6 cable to make the transmission distance up to 394feet (120 meters). The highest resolution supported is 4Kx2K(3840x2160@30Hz), and it will extend HDMI signal unlimitedly with cascade connection.

HDfury Integral Special offer

in this box is

1x Hdfury Integral 300MHZ
6x HDMI CABLETIME HDMI CABLE 200CM
2x HDMI 4K Extender sender TX AVS 4k (120m)
2x HDMI 4K Extender reciever RX AVS 4k (120m)
4x Power adapter DC5V/2A AVS
2X IR Sender extension cable TX AVS
2x IR Receiver extension cable RX AVS

Unique HDCP Doctor

Providing a total of 6 HDCP 1.4 and 2.2 engines for decryption/encryption. HDfury Integral offers a total HDCP workaround solution including HDCP 2.2 > HDCP 1.4 and HDCP 1.4 > HDCP 2.2 both ways conversion within the same unit.
It is capable of connecting any HDCP1.x or HDCP2.x source devices to any HDCP1.x or HDCP 2.x sink devices.
Each RX block decrypts the input first whether its 1.x or 2.x. Then each output port can individually encrypts it to 1.4(both) or 2.2(only top port) or not encrypt it at all if it was not encrypted initially.
Dual conversion can be operated on both channels simultaneously.*

 

Display HDCP 2.2 Content with Non-HDCP2.2 Compliant Devices

HDCP 2.2 is the new copy-protection scheme for 4K UHD content. Not only it is not backward compatible but many recent 4K devices don’t even support it.
Source devices, including media servers and head-ends like Netflix, will encode their 4K content with this new scheme. TVs must be HDCP 2.2-enabled to play it, and everything in the video chain including switches and receivers must be compliant as well, or the display will go dark and/or display a HDCP error message.
Bad news for consumers who have purchased expensive, high-bandwidth, processor-rich switchers, receivers and displays to accommodate 4K. While the newer products may support the bandwidth needs of 4K, they won’t play copy-protected works until Integral is an active part of the setup.

 

2×2 Splitter up to 4K60 4:2:0 300MHz 10.2Gbps

Splitting any signal up to 4K60 4:2:0 300MHz. Thanx to IR/BT/USB or push button, you can easily switch between 2 inputs that will be replicated to 2 outputs. HDCP conversion can be configured and applied on the fly in order to always output the type of HDCP signal encryption that your display or sink device is expecting.

 

HDR and Infoframe Metadata Live Injector and Extractor

The Integral is capable of injecting and extracting live Infoframe and HDR metadata at any resolution and in real time.
Using latest firmware you can turn ON/OFF the HDR MODE of your HDR display at will from push buttons, APP, IR or USB GUI PC windows software. See it in video: here.
A further software solution for a complete real time handling of infoframe and HDR metadata is now available: here from our exclusive licensed partner AV TOP.

 

HDMI Audio Extracting

HDfury Integral can extract HDMI audio up to 5.1 and pass-thru any sound format including Atmos via HDMI. It have a simultaneous output of analog L/R stereo and up to 5.1 optical S/PDIF via 3.5mm combo jack connector.

 

External Audio Replacing

Mini jack input connector (or Mic/Line IN) option is available to replace the audio in any HDMI/DVI-D stream up to 4K60 4:2:0 300MHz 10.2Gbps.
Audio replacing only work on one channel, the secondary channel is a direct path from HDMI to HDMI.
Useful in presentation areas or for simply streaming your phone/tablet music to your HDMI amp.

 

Advanced EDID Management

The most advanced EDID Management solution we ever done is now available from the Integral with either:
A Selected EDID bank, a Custom uploaded EDID, a Self generated Automix EDID or a Fixed basic EDID.
Sniff EDID from connected sink devices, Save, Edit, Load any custom EDID table at anytime.
Select and pick any EDID of your choice from a preloaded list of 25 EDID tables, it loads and reset HPD to present your chosen one automatically.
AutoMix EDID feature will create a custom EDID by mixing both sink EDID connected to the splitter output ports.
Mixing rules in AutoMix mode can be selected through 4 different algorithms.
Some EDID flags can be forced in Automix such as: Stereo/5.1/Full/YCbCr/BT2020/HDR/DV/3D.

 

HDMI/CEC Total Commander

HDfury Integral offers an unique CEC commands manager, with CEC compatible equipment.
CEC commands allow a HDMI source to send instructions and operate check on connected HDMI devices.
Using USB, IR, Push buttons or the Integral’s Android/Apple APP for smartphone/tablet, user can configure custom CEC commands and send them LIVE or based on trigger event.

 

Total Control

4K Integral Total Control APP is available on Google Market for mobile and tablet running Android and on the AppStore for iOS.
You can control HDfury Integral using your mobile phone or tablet via an auto-pairing bluetooth connection.
USB GUI Utility via Windows PC, IR control and various physical buttons for configurations are also available.
Thanks to the community, IR pronto code list was added to iRule and Logitech Harmony for even easier and seamless integration

 

HTPC Mode

Having issue with AVR or display connected at your HTPC output, like standby mode resume issue or such ?
Integral now feature an unique and exclusive HTPC mode where anything that happen at the output is never reported to the source device.
This currently goes beyond what EDID detective and Dr.HDMI alike can offer and represent the ultimate HTPC issue solver.

 

2×2 Matrix up to 4K30 4:4:4 300MHz or 4K60 4:2:0 300MHz

Matrix solution is available for HDMI stream up to 4K30 4:4:4 300MHz 10.2Gbps or 4K60 4:2:0 300MHz 10.2Gbps

  • In Matrix mode only one HDCP 2.2 input is allowed, the other must be HDCP1.4 or DVI-D/HDCP 0.0

HDMI Extender 4KX2K HDbitT HDMI over IP CAT6 AVS

 

Features:

  • Supports resolutions up to 4Kx2K@30Hz
  • Transmits HDMI signal over single CAT5/5e/6 cable
  • Extends up to 394 feet (120 meters) at 4Kx2K@30Hz
  • Connects with routers to split and extend unlimitedly
  • Compatible with existing network, not affect Internet Supports IR signals 20kHz to 60kHz
  • Compatible with HDMI V1.4 and HDCP 1.4

Tech specifications.

HDMI Signal :
Compatible with HDCP
transport protocol :
HDbitT4
Support resolutions :
480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz, 4Kx2K @24/25/30Hz
Network Cable :
UTP/STP Cat5/5e/6
Transmission distance :
Up to 120 meters transmission distance for 1080p 60Hz Full HD over single CAT6
IR signal :
Supports 20~60KHz IR devices
Working Temperature :
0°C~60°C
Power Supply :
DC5V/2A
Power Consumption :
TX: 5W; RX: 4W
Dimensions :
96.8(W) x 94(D) x 23.7(H)mm *2PCS 
Weight :
TX:170g RX:167g
Color :
Black 

Write Your Own Review
You're reviewing:Hdfury Integrall + 2x 4k hdmi extender + 6x HDMI Cable 28AWG
Copyright © 2009-present Hdury, Inc. All rights reserved.