HDfury 4S

HDfury 4S

The HDfury 4S is an updated version of the HDfury4 platform running the Scaler Firmware.
The HDfury4 platform is also capable of running the 3Dfury firmware
Owner of any HDfury4 (either HDfury4S or 3Dfury) can flash any firmware (Scaler or 3Dfury) at anytime.

€249.00

HDFury Vertex

HDFURY VERTEX

  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)

Description

HDfury 4S is capable of connecting any HDMI sources to any Analog or Digital display. GUARANTEED!
HDfury 4S offers all the features and controls you need to solve the seemingly simple matter of getting your digital AV sources to display correctly, easily and affordably on either an Analog or Digital display.
Whatever the HDMI source, HDfury4S is capable of scaling it up or down, deinterlacing it, and adjusting its aspect ratio to match the native resolution of your video display or computer monitor. Any display resolution up to 1920×1200 can be supported (or 1080p96).
If the input is 50Hz or 60Hz, you would be able to manually select either one on the output, perfect for customers who have USA TV’s in Europe or other way around(PAL/NTSC)
The HDfury4 Scaler is ideal for adding digital connectivity and scaling to existing Analog or Digital AV systems.

HDfury4S Key Features

    • Display HDMI content on ANY HDMI/DVI-D/RGB/VGA/YUV TV, Monitor or Projector
    • Always display any HDMI content at your display max resolution
    • HDfury4S can output in both Digital and Analog Video/Audio simultaneously !
      Therefor acting as an advanced digital/analog splitter.
    • Double, Triple, Quadruple frame 1080p24 material up to 1080p96
    • Double Frame 720p50 and 720p60 into 720p100 and 720p120
    • Transcoder and Scan converter, Toggle 50/60Hz or PAL/NTSC at will.
    • Any input can be up or down-scaled to a specified resolution up to 1080p96 for HDTV
    • Any input can be up or down-scaled to a specified resolution up to 1920×1200 for PC mode
    • 7.1 Dolby® True HD & DTS Master Audio
    • Input: HDMI 1.4 (HDCP compliant) input with 3D and Deep Colour support
    • Output: Digital HDMI / DVI-D and/or Component (YPbPr/YCbCr) and VGA (RGBHV) video output
    • 3 Aspect Ratio Modes (Full Width, Full Screen, Original, read FAQ for more details)
    • Custom porch settings, resolution and refresh rate adjustment through Windows Software.
    • Dynamically create EDID based on Sink EDID parameters
    • Customisation settings available through DIP SWITCH and buttons
    • Perfectly and automatically center image in all standard NTSC/PAL component modes
    • Manually adjust horizontal screen position in all NTSC/PAL RGBHV modes
    • Performs Colour Depth Upscaling in all modes (ON/OFF user selectable)
    • Horizontal and Vertical Sync Polarity Inverter included
    • Automatic SD/HD color-space selection
    • Accept third party accessories on its output
    • Improved output cable driver for driving long cable runs (40-50′)
    • Software/Firmware upgradeable through USB
    • Special software available for Mits RPTV and others 1080i display.

 

  • Sound output:
    • ■ Analog and Digital Optical (S/PDIF 5.1 Dolby/DTS) through an innovative 3.5mm combo jack and 7.1 DTS-MA & Dolby True HD via HDMI output
    • ■ HDMI audio passthrough

HDfury4S Input/Output mode:

  • VIDEO MODE INPUT COMPATIBILITY:

    • Basically any CEA / VESA input resolution is supported up to 1920x1200x60
    • All known SD, HD and Full HD formats are supported including:
    • ■ 480p50, 480p60
    • ■ 576p50, 576p60
    • ■ 720p50, 720p60
    • ■ 1080i25, 1080i30, 1080p24, 1080p25, 1080p30, 1080p50, 1080p60
  • VIDEO MODE OUTPUT COMPATIBILITY:

  • All known SD, HD and Full HD formats are supported including:
  • ■ 480p50, 480p60
  • ■ 576i, 576p25, 576p30
  • ■ 720p50, 720p60, 720p100, 720p120
  • ■ 1080i, 1080p24, 1080p25, 1080p30, 1080p48, 1080p50, 1080p60, 1080p72, 1080p75, 1080p96
  • All following PC graphics mode are supported in either 50 or 60Hz:
  • ■ 800×600, 1024×768, 1280×768, 1360×768, 1440×900, 1600×900, 1280×1024, 1400×1050, 1600×1200, 1920×1200
  • ■ Passthrough any resolution

HDfury4S Specifications

Input

  • 1 x HDMI v1.4 (DVI 1.0 compatible)
  • 12-bit deep color HDMI native support
  • Automatic Input Format Detection: Digital YCbCr and RGB

Output

  • Digital HDMI / DVI-D and/or VGA FEMALE output connector, 10 bit analog resolution.
  • HDCP supported (Integrated HDCP decipher engine, Pre-programmed HDCP key)
  • Horizontal shift capability for RGB output mode
  • ■ Enabled with a dip-switch, applied with push-buttons
  • Output horizontal and vertical sync polarity selector for RGB modes (dip switch)
  • Digital Output format: Either HDMI or DVI-D
  • 11-bit 225MHz DAC processing (for true 10-bit analog output)
  • Two separate Internal EDID EEPROM with complete CEA861 extension block, Dip-switch selectable
  • ■ One EDID supports all formats
  • ■ The other EDID is up to 1080i, and no 24Hz support (by default, reprogrammable)
  • Full BTB and WTW support in YPbPb output
  • Automatically switches color-spaces for both HDTV and SDTV
  • Precise black levels – no black crush in any standard mode
  • Integrated RGB Color Space Converter for both RGB-to-YCbCr and YCbCr-to-RGB (both 601 and 709) with true 12-bit accurate data using 14-bit processing
  • 4:2:2 <> 4:4:4 converter with 12-bit accurate data using 14-bit processing
  • Analog Output format
  • Either RGB or YPbPr, dip-switch selectable
  • YPbPr requires VGA->3RCA breakout cable
  • All HD/SDTV formats from 1080p down to 480i, NTSC and PAL
  • Including 1080p @ 72Hz PAL and NTSC (for RGB output only)
  • Including 1080p @ 24Hz PAL and NTSC

Industry-Standard Compliance

  • HDMI 1.4
  • EIA/CEA-861E
  • DVI 1.0
  • HDCP 1.1

Digital Video Input / Output

  • Dual integrated HDMI 1.4 cores
  • Supports DTV resolutions up to 1080p @ 72Hz or 720p/1080i @ 120Hz with 36-bit color depth.
  • Flexible digital video interface:- 24/30/36-bit RGB/YCbCr 4:4:4- 16/20/24-bit YCbCr 4:2:2- 8/10/12-bit YCbCr 4:2:2 (ITU-R BT.656)

Digital Audio Output

  • HDMI audio passthrough
  • Industry-standard S/PDIF output
  • Supports 2-channel 32-192kHz stereo audio
  • Supports IEC60958 2-channel PCM
  • Capable of passing IEC61937 compressed audio (5.1 Dolby® Digital, DTS, etc.)
  • 7.1 Dolby® True HD & DTS Master Audio

Dual purpose audio output connector

  • SPDIF digital output for 5.1 Dolby/DTS
  • Analog L/R 2-channel stereo

Getting Started with HDfury4S

No HDMI? No standard HD resolution on your display? No Problem!

Play HDMI movies, games, satellite/cable, and internet videos on any TV/HDTV/Projector or Monitor! HDfury4S allows you to view HDMI content from your PS4, X1, PS3, X360, Blu-ray player, satellite/cable or internet on all standard 50/60Hz or 100/120Hz displays with either Digital or Analog inputs or both at the same time! If your TV, monitor or projector cannot play HDMI content because it lacks of a HDMI input, HDfury4S can help you to achieve upscale/downscale, scanconvert, transcode and conversion to match any HDMI/DVI-D/YUV(component) or RGBHV(VGA) display's native resolution! If your TV, monitor or projector can play regular HDMI games and Blu-ray movies then the HDfury4S can still help you to achieve upscale/downscale to match your display native resolution! Upgrade to Perfect HDMI at your display native resolution for a fraction of the cost of buying a new display! The HDfury4S supports every HDMI signal type in existence today from SD to Full HD and beyond (up to 1080p96). It is firmware upgradable so that new features can be added in the future as needed! In addition to supporting all standard displays in either analog or digital (HDMI, DVI-D, RGBHV, component), the HDfury4S also offer dedicated and convenient firmware to 1080i sets like the fantastic 1080i Mits RPTV or the Pioneer Kuros and PDP line of Plasma. How difficult is it to set up? A few dip switchs on the HDfury4S must be set once depending on whether your TV is a 50/60Hz or 100/120Hz model or if it takes Digital DVI-D/HDMI or either RGBHV or component as input. No other setup is required. For more information download the User Manual from the Download Tab above. HDfury4S is 100% plug-n-play with existing convenience scaling for 1080i max display (others doable on request) Just connect the HDfury4S between the source and the TV/projector. That’s it! Which projectors and TVs are supported? Any standard 50/60Hz or 100/120Hz displays will work with HDfury4S. HDfury4S is the world first solution that work with any Digital (DVI-D/HDMI) or Analog (RGBHV/component) displays, no matter if they are 60hz only and you live in a 50hz area or if they don't support any standard HD resolution like 1920x1080 or 1280x720. Thanx to the embedded scaler and unique aspect ratio modes, you will be able to display HDMI sources at the best of your display's capabilities ALWAYS & GUARANTEED!

Got questions ? We have answers !

My display is not 16:9, how doe the aspect ratio modes work ?

99% of the time any scaler or TV simply stretches the picture to fill the screen or then leaves black bars on left/rigth because it assumes fixed 4/3 aspect ratio on a 16/9 screen. Instead the furyscaler will actually retains 100% the exact correct input aspect ratio and "drops" it on the final output frame size while scaling the maximum side. Therefore it automatically leaves black bars on top/bottom or sides as dependent on the incoming resolution.

I have a PC mode on my TV (or a PC monitor) what resolutions are supported for graphics mode ?

All following PC graphics mode are supported in either 50 or 60Hz: 800x600, 1024x768, 1280x768, 1360x768, 1440x900, 1600x900, 1280x1024, 1400x1050, 1600x1200, 1920x1200. More supported resolutions can be added on request.

What output resolution does the HDfury4S support in HDTV mode ?

All known SD, HD and Full HD formats are supported including: 480p50, 480p60, 576p50, 576p60, 720p50, 720p60, 720p100, 720p120, 1080i25, 1080i30, 1080p24, 1080p25, 1080p30, 1080p48, 1080p50, 1080p60, 1080p72, 1080p75, 1080p96

My HD display is from Europe/UK/Australia where we use a 50Hz refresh rate. Will it work?

Yes, as all HD displays that support 50Hz also support 60Hz. Additionally HDfury4S is capable of toggling 50/60hz for PAL/NTSC in both HDTV and graphics modes at will.

My HD display only accept 60Hz material and in Europe/UK/Australia, we use a 50Hz refresh rate. Will it work?

Yes, through a simple dip switch setting, you can force the output to be always 50Hz if needed.

What version of HDMI does the HDfury4S work with? Do I need HDMI 1.3/1.4a? Does it matter?

It does not matter. HDfury4S works with any version of HDMI from 1.0 and up.

Do I need to set anything special in my HDMI source device to set resolution correctly?

No. The HDfury4S will be detected as 1080p capable by your source and always accept and process the highest quality stream from your source devices. There is no need to set the HDMI source to any specific resolution, the HDfury4S will take care of it and scale up or down if needed.

Is there any latency (delay) introduced to the signal?

Less than one frame of latency per second is added to the signal which is not at all noticeable in games.

What is the USB port for?

To supply power from any USB port available if required (such as a PS3 USB port) and for firmware upgrades when new (additional) functions and enhancements are offered.

What about long HDMI cable runs? Can I expect issues?

HDfury4S acts as an HDMI repeater device. So having a HDfury4S in the path will amplify and recover the signal. You should not need any passive (or active) HDMI amplifiers, especially if you put HDfury4S in the middle of your cable run. If you previously had to use an amplifier, the HDfury4S can most likely take its place. The HDfury4S has been used with 50 foot (and longer) HDMI cables without issues.

How are the new lossless audio formats via HDMI input handled ? E.g. DTS-HD/MA and DD/E-AC3 : Are they stripped down to DTS core or Dolby Digital respectively to fit the requirements of the S/PDIF standard ?

Lossless audio is transmit through HDMI output only. HDfury4S does not compress or otherwise create loss to the incoming audio. Only stereo and 5.1 sound can be output via SPDIF output and analog output.

Data sheet

954 Items

Attachments

open Beta scaler software v1.0

Hi Everyone ! Here is the beta release of the scaler firmware operating on the HDfury4/3Dfury platform! It is essentially a brand new product just using the current HDfury4/3Dfury-platform. There are two separate updates in the .zip package. You need to run both to update the MCU and the FPGA for the scaling functions. The basic idea is that any input video/graphics is converted to a particular video/graphics output mode dictated by the DIPs and the two buttons on top. Any input can be up-scaled or down-scaled to a specified resolution up to 1080p75 Operating instructions: SBS/OU mode button (previously 3D mode button) cycles between video output modes and graphics output modes: .. -> video -> graphics -> video... Frame-Rate button cycles between resolutions: when in video mode: .. -> 480p -> 576p -> 720p50 ->720p60 -> 1080i25 ->1080i30 -> 1080p50 -> 1080p60 -> 480p ... when in graphics mode (all output at 60Hz): .. -> 1024x768 -> 1360x768 -> 1280x1024 -> 1600x1200 -> 1920x1200 -> 1024x768.. Note1: we allow conversion into any of the above mentioned modes. E.g. if user sets up 1600x1200 then all input video is converted to that PC resolution. Note2: we enable conversion between 50 and 60Hz and deliberately leave it up to the user to optimize based on the content as desired. if the high-framerate-DIP is ON (DIP7) then the following overrides become active: 1080p24 -> 1080p72, timing 2200hpixel, 178.2MHz clock 1080p25 -> 1080p75, timing 2112hpixel, 178.2MHz clock 1080i25 -> 1080p75, timing 2112hpixel, 178.2MHz clock 720p60 -> 720p120 720p50 -> 720p100 One general exception: if the high-framerate-DIP is low (DIP7) then: 1080p24 -> 1080p24 is retained in both 1080p50/60 output modes. If this needs to be changed, we can do it. Work in progress: - 24Hz movie mode cropped to 2.40 aspect ratio to ease frequency - 480i / 576i input and output support - scaling for framepacked 3D material (currently v1.0 SBS and OU are supported with full scaling) - GUI for custom porch settings - Please make your suggestions for additional features or additional PC resolution or Video output mode. Known issues: - 1080i scaled output not yet 100% compliant (may fail on some displays) - Image centering may have wrong values for some modes if the DIP switch for RGB shift is ON. - IR not implemented yet - Please report any others issues you might find. Important: - If you are unsure how to perform the updates, please refer to the v1.21 latest firmware update for more details. - We can re-assign any DIP or buttons any time, so if you find a way that would be more suitable or more user friendly than the current one, feel free to suggest it. - You need to be logged in order to view or download the update files. We are looking forward to read your feedback in order to improve it and make one more step toward a final release. We wish you a happy testing with the most versatile video processor ever done!

Download (476.42k)
open Beta scaler software v1.1

Here is an updated beta release of the scaler firmware operating on the HDfury4/3Dfury platform! It is essentially a brand new product just using the current HDfury4/3Dfury-platform. There are two separate updates in the .zip package. You need to run both to update the MCU and the FPGA for the scaling functions. The basic idea is that any input video/graphics is converted to a particular video/graphics output mode dictated by the DIPs and the two buttons on top. Any input can be up-scaled or down-scaled to a specified resolution up to NOW 1080p96 for CRT PJ! PC software for custom porch settings now included. Operating instructions: - The slide switch LEFT/RIGHT on the side of the unit selects whether Video or Graphics output mode is selected. "L" or "MID" = Video modes (720p/1080i...." "R" = Graphics modes (1280x1024, 1920x1200...) - The buttons on the top of the unit now function as UP and DOWN function for the given output mode (video/graphics) Video mode in 60Hz: 480p 720p60 1080i30 1080p60 Video mode in 50Hz: 576p 720p50 1080i25 1080p50 Graphics mode [always 60Hz]: 1024x768 1360x768 1280x1024 1600x1200 1920x1200 - DIP8 controls the 50/60Hz selection so that "OFF = 60Hz" and "ON = 50Hz" Note1: we allow conversion into any of the above mentioned modes. E.g. if user sets up 1600x1200 then all input video is converted to that PC resolution. Note2: we enable conversion between 50 and 60Hz and deliberately leave it up to the user to optimize based on the content as desired. - DIP7 activates a slew of specialized functions. If "ON" then: 1. When the input is a movie (1080p24) the buttons on the top of the unit control specialized frame rate conversion 1080p24 1080p48 1080p72 [2.40 Aspect Ratio] 1080p72 [FULL] 1080p96 [2.40 AR] CUSTOM [GUI controlled] 2. Other framerate conversions are automatic: 1080p25 -> 1080p75, timing 2112hpixel, 178.2MHz clock 1080i25 -> 1080p75, timing 2112hpixel, 178.2MHz clock 720p60 -> 720p120 720p50 -> 720p100 - PC GUI interface beta is included. This allows the control of the output when the input is a movie (1080p24). It gives control for the video blanking parameters at the moment. Clock frequency control and image clipping controls will be added soon. The current used high speed clock is 178.2MHz for this mode. Change the values with care and understand what you are doing. Do not exceed total pixel counts and line counts otherwise image will be lost. H and V front porches are automatically calculated from other values. This GUI is for a serious advanced user only. One general exception: if the high-framerate-DIP is low (DIP7) then: 1080p24 -> 1080p24 is retained in both 1080p50/60 output modes. If this needs to be changed, we can do it. Work in progress: - 480i / 576i input and output support - scaling for framepacked 3D material (currently v1.1 SBS and OU are supported with full scaling) - PC GUI enhancements for custom porch settings - Please make your suggestions for additional features or additional PC resolution or Video output mode. Known issues: - Image centering may have wrong values for some modes if the DIP switch for RGB shift is ON. - IR not implemented yet - Please report any others issues you might find. Important: - If you are unsure how to perform the updates, please refer to the v1.21 latest firmware update for more details. - We can re-assign any DIP or buttons any time, so if you find a way that would be more suitable or more user friendly than the current one, feel free to suggest it. - You need to be logged in order to view or download the update files. We are looking forward to read your feedback, especially for 72Hz and 96Hz modes in order to improve it and make one more step toward a final release. We wish you a happy testing with the most versatile video processor ever done

Download (560.62k)
OPEN BETA Scaler software (v1.2)

Here is another updated beta release of the scaler firmware operating on the HDfury4/3Dfury platform! It is essentially a brand new product just using the current HDfury4/3Dfury-platform. There are two separate updates in the .zip package. You need to run both to update the MCU and the FPGA for the scaling functions. The basic idea is that any input video/graphics is converted to a particular video/graphics output mode dictated by the DIPs and the two buttons on top. Any input can be up-scaled or down-scaled to a specified resolution up to NOW 1080p96 for CRT PJ! An updated PC software for custom porch settings is included. Operating instructions: - The slide switch LEFT/RIGHT on the side of the unit selects whether Video or Graphics output mode is selected. "L" = Video modes (720p/1080i/1080p/...." "R" = Graphics modes (1280x1024, 1600x1200, 1920x1200...) "MID" = Locked mode. Buttons and horizontal shift controls are disabled so that they are not accidentally changed. - The buttons on the top of the unit now function as UP and DOWN function for the given output mode (video/graphics) Video mode in 60Hz: 480p 720p60 1080i30 1080p60 Video mode in 50Hz: 576p 720p50 1080i25 1080p50 Graphics mode [always 60Hz]: 1024x768 1360x768 1280x1024 1600x1200 1920x1200 - DIP8 controls the 50/60Hz selection so that "OFF = 60Hz" and "ON = 50Hz" Note1: we allow conversion into any of the above mentioned modes. E.g. if user sets up 1600x1200 then all input video is converted to that PC resolution. Note2: we enable conversion between 50 and 60Hz and deliberately leave it up to the user to optimize based on the content as desired. Note3: 50Hz graphics modes added. These are according to CVT standards at 50Hz. If the DIP8 (50/60Hz) is "ON" then also the graphics modes are frame rate converted to 50Hz. - DIP7 activates a slew of specialized functions. If "ON" then: 1. When the input is a movie (1080p24) the buttons on the top of the unit control specialized frame rate conversion 1080p24 1080p48 1080p72 [2.40 Aspect Ratio] 1080p72 [FULL] 1080p96 [2.40 AR] CUSTOM [GUI controlled] 2. Other framerate conversions are automatic: 1080p25 -> 1080p75, timing 2112hpixel, 178.2MHz clock 1080i25 -> 1080p75, timing 2112hpixel, 178.2MHz clock 720p60 -> 720p120 720p50 -> 720p100 - Major update for PC GUI interface is included (now at version 1.1). This allows the control of the output when the input is a movie (1080p24). Now all variables are available for tweaking. It is possible to create any aspect ratios by reducing the amount of lines. There are some defaults like 1.85/2.35/2.40. Clock frequency is automatically calculated based on the timing settings. There is an overclock limit for the clock frequency for overheating protection. The max clock rate is 200MHz. Overclocking up to 200MHz is permitted so know what you are doing. It can possibly damage the projector Change the values with care and understand what you are doing. Do not exceed total pixel counts and line counts otherwise image will be lost. H and V front porches are automatically calculated from other values. This GUI is for a serious advanced user only. One general exception: if the high-framerate-DIP is low (DIP7) then: 1080p24 -> 1080p24 is retained in both 1080p50/60 output modes. If this needs to be changed, we can do it. All modes are saved so upon the next power cycle the previous state comes up. This includes the settings applied from the PC GUI. Work in progress: - 480i / 576i input and output support - scaling for framepacked 3D material (currently v1.1 SBS and OU are supported with full scaling) - Please make your suggestions for additional features or additional PC resolution or Video output mode. Known issues: - Image centering may have wrong values for some modes if the DIP switch for RGB shift is ON. - IR not implemented yet - Please report any others issues you might find. Important: - If you are unsure how to perform the updates, please refer to the v1.21 latest firmware update for more details. - We can re-assign any DIP or buttons any time, so if you find a way that would be more suitable or more user friendly than the current one, feel free to suggest it. - You need to be logged in order to view or download the update files. We are looking forward to read your feedback, especially for 72Hz and 96Hz modes in order to improve it and make one more step toward a final release. (this is yet close to final) We wish you a happy testing with the most versatile video processor ever done!

Download (568.33k)
Hdfury Silabs Driver 4.0.0

HDFury Silabs Driver 4.0.0 for XP/VISTA/WIN7/WIN8/WIN10

Download (8.85M)
HDfury Silabs Driver 3.9.2

HDfury Silabs Driver 3.9.2 for XP/VISTA/WIN7/WIN8

Download (1.63M)
Scaler GUI 1.1

HDFury X4 PC windows Scaler GUI 1.1 (PC Windows Software only for Scaler Firmware)

Download (4.65M)
[24-AUG-18] HDR to SDR 0.5 beta

HDFury Firmware for the 3DFury, HDfury 4 and HDFury 4X HDR to SDR 0,5 BETA VERSION

Download (11.51M)
[20-May-2017] HDFury Scaler1080i

HDfury Firmware 1080i force for the HDFURY 4, 3DFURY, HDFURY 4X FuryScaler 1080i Force for ATV3/Roku/XboxOne on 1080i max display

Download (5.21M)
[20-MAY-17] HDfury 3D, 4 and X4

HDfury 4, HDFURY 4X and 3Dfury v1.21 Final FPGA and FW UPDATE procedure included in txt file

Download (5.49M)
HDFury scaler User manual

HDfury X4, HDfury4 Scaler User Manual Rev.1.6

Download (1.42M)
HDFURY 4, hdfury4X 3Dfury Manual

HDfury 4, Hdfury X4, 3Dfury User Manual Rev.1.1

Download (1.69M)
3d Glasses and Emitter

Hdfury 3D Glasses & Emitter User Manual Rev 1.0

Download (673.54k)

Customers Love Us

  • "Excellent products and excellent service." - Josephine
  • "Excellent value. High quality products at reasonable prices." - Warren
  • "Outstanding customer service." - Jack
  • "You're the best! Thank you!" - Tatiana

Customers who bought this product also bought: